| Summary - Exhaust system for vehicles with front-wheel drive |
| –
| with hole for aligning exhaust system → Chapter |
| –
| with catalytic converter |
| –
| protect against shocks and blows |
| –
| Avoid a large deflection, max. deflection 10° |
| –
| coat with hot bolt paste -G 052 112 A3- |
| 8 - | Lambda probe -G39-, 50 Nm |
| –
| coat with hot bolt paste -G 052 112 A3-; hot bolt paste -G 052 112 A3- must not get into the slots of the probe body |
| –
| Plug connection for lambda probe is located below the protective cover → Chapter |
| 9 - | Lambda probe -G130-, 50 Nm |
| –
| Fitting position: horizontal in vehicle, bolted connection points to the left |
| –
| Tighten bolted connections evenly |
| 13 - | Front and rear silencer |
| –
| Replace individually when carrying out repairs |
| –
| exhaust pipe with separation point → Fig. |
|
|
|
