Removing and installing the fuel tank |
Special tools and workshop equipment required |
t
| Engine/gearbox jack (e.g. -V.A.G 1383/A -) |
t
| Fuel extraction device (e.g. -VAS 5190-) |
–
| Switch off ignition and withdraw ignition key. |
–
| Empty fuel tank with fuel extraction equipment (e. g. -VAS 5190-). |
–
| Unscrew cover (below rear seat). |
–
| Pull off the 4-pole connector from the flange of the fuel delivery unit. |
–
| Open the fuel tank cap, lever out tensioning ring in rubber bowl (around filler neck). |
–
| Press through rubber bowl to the inside. |
–
| Unscrew tank filler neck in the right rear wheelhouse. |
|
|
|