| Replace middle silencer or rear silencer for 4 x 4 vehicles |
| Special tools and workshop equipment required |
| t
| Body saw (e.g. -V.A.G 1523 -) |
| –
| Separate exhaust pipe at right angles at the separation point -arrow- with body saw (e.g. -V.A.G 1523-). |
| –
| Mark on both sides 50 mm from the separation point. |
| –
| Position double clamp at the side markings. |
| –
| Align exhaust system free of stress. |
| –
| Align rear silencer horizontally. |
| –
| Tighten bolted connections of the double clamp evenly to 40 Nm. |
| –
| Installation position of double clamp: Bolted connection points to the left. |
|
|
|
