| Removing and installing, tightening the timing belt |
Note | t
| Adjusting work on the timing belt must only be performed on a cold engine. |
| t
| When carrying out engine repair replace the toothed belt (apart from regular change interval),it is recorded in the Service Schedule! |
| Special tools and workshop equipment required |
| t
| Rig pin for the diesel injection pump -3359 - or -MP1-301- |
| t
| Supporting device -MP9-200 (10-222A)- |
| t
| Crankshaft arrester -T10050- |
| t
| Two-hole nut turner, e.g. -T10020-, - Matra V159-, -Hazet 2587- or -Stahlwille 127-17- |
| t
| Pressure pad -T10172- with stud -T10172/4- |
| t
| Offset screwdriver -T10264- |
| t
| Pliers for spring strap clamps |
| t
| Liquid locking material -D 000 600 A2- |
|
|
|
