Octavia Mk1
Summary of components of fuel filter |
The fuel flow direction is indicated with arrows on the hoses, on the glow valve and the fuel filter. |
1 - | Return-flow hose |
q | to fuel cooler |
q | blue marking |
2 - | Intake hose |
q | from fuel tank |
q | white marking |
3 - | Retaining clip |
q | replace if damaged |
4 - | Preheating valve |
q | Fitting position: Arrow points to fuel tank |
q | if the filter is replaced remove retaining clip and preheating valve with the fuel lines connected |
q | Temperature below +15 °C: access to filter open |
q | Temperature above +31 °C: access to filter closed |
5 - | O-ring |
q | replace |
6 - | Return-flow hose |
q | from the tandem pump |
q | blue marking |
7 - | Fuel hose |
8 - | Fuel temperature sender -G81- |
9 - | Non-return valve |
q | only vehicles ► 03.02 |
q | Fitting position: arrow points to tandem pump |
10 - | Intake hose |
q | to the tandem pump |
q | white marking |
11 - | Fuel filter |
q | fill up with diesel fuel before fitting |
q | do not interchange connections |
q | replace if damaged |
12 - | Gasket |
q | replace if damaged |
13 - | Drain plug |
q | to ventilate remove the retaining clip of the preheating valve and remove preheating valve with the fuel lines connected |
q | release and drain approx. 0.1 litre fluid (catch) |