| Fuel filter - Summary of components |
Note | Fuel hoses at the engine must only be secured with spring-type clips. The use of clamp-type or screw-type clips is not allowed. |
| –
| do not interchange, top blue ring |
| –
| Fitting position: Arrow points to fuel tank |
| –
| remove the holding clamp when changing the fillter and remove regulating valve with the connected fuel lines |
| –
| for a temperature of less than + 15 °C: access to filter open |
| –
| for a temperature of above + 31°C: access to filter open |
| –
| from the injection pump |
| –
| the direction of flow is marked by arrows |
| –
| to remove, slacken clamping screw at bracket |
| –
| do not interchange connections |
| –
| fill up with diesel fuel before fitting |
| –
| to ventilate, remove retaining clip for regulating valve and remove regulating valve with connected fuel lines, slacken clamping screw and pull out filter to the top |
| –
| Loosen and drain off approximately 0.1 litres of fluid |
|
|
|
