| If the approved code number was not entered, this readout appears in the display. |
| –
| Select function 06 “End output” and switch ignition off. |
Note | t
| The control unit Motronic stores the entered and displayed coding only after the ignition has been switched off for at least 15 seconds. Incorrect coding results in: |
| t
| poor driveability (jerking when changing gears, load alteration shock etc.) |
| t
| Increase in fuel consumption |
| t
| Storage of non-existent faults in fault memory |
| t
| non-execution of functions (lambda control, activated charcoal filter system actuation, etc.) |
| t
| Reduction in life of automatic gearbox |
|
|
Function unknown or cannot -> | be carried out at the moment |
|
