| Testing voltage supply, terminal 30 |
| For engines with identification characters AEG, APK, AQY |
| –
| Connect test box-V.A.G 1598/22- to the wiring loom on the engine control unit → Chapter. |
| –
| Use multimeter to measure voltage supply between sockets 2 + 3 of test box. |
| For engines with identification characters AZH, AZJ |
| –
| Connect test box-V.A.G 1598/31- to the wiring loom on the engine control unit → Chapter. The control unit is not connected. |
| –
| Use multimeter to measure voltage supply between sockets 1 + 62 of test box. |
| Continued for all engines |
| Specified value: min. 11.5 V |
| If the specified value is not reached: |
|
|
|
