Inspecting throttle valve control unit -J338- |
Note If the throttle valve control unit is replaced, it is then essential to adapt this new control unit to the engine control unit → Chapter. |
Special tools and workshop equipment required |
t
| Handheld multimeter, e.g. -V.A.G 1526 A oder B- |
t
| Measuring tool set, e.g. -V.A.G 1594 A, B oder C- |
l
| Throttle valve must be in the idling position. |
l
| On vehicles with an automatic gearbox the selector lever must be in position “P” or “N”. |
l
| If vehicle is equipped with air conditioning, this must be switched off. |
l
| If the vehicle is equipped with cruise control, it must be correctly set. |
|
|
|