skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing parts of the exhaust system for 4 x 4 vehicles > < Removing and installing exhaust manifold

Octavia Mk1

Replace middle and rear silencer
Replace middle and rear silencer
Special tools and workshop equipment required
t  Body saw, e.g. -V.A.G 1523 A- or chain pipe cutter, e.g. - VAS 6254-
A separation point is provided for repair purposes for replacing the middle silencer or rear silencer.
   
–  Separate exhaust pipe at right angles at the separation point -arrow 2- with body saw.
–  When installing double clamp -4- position on the side markings -arrows 1 and 3-.
–  Align exhaust system free of stress → Chapter.
–  Align rear silencer horizontally.
–  Tighten bolted connections of the double clamp evenly to 40 Nm.
–  Installation position of double clamp: horizontally, bolted connections pointing forward.
  A26-0130

Removing and installing parts of the exhaust system for 4 x 4 vehicles > < Removing and installing exhaust manifold