skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Input values when changing the dash panel insert > < Adaptation

Octavia Mk1

Adapting the service interval display when replacing the dash panel insert
Adapting the service interval display when replacing the dash panel insert
If the dash panel insert is replaced, the current service interval data must be entered into the new dash panel insert. If the current values are not known, the initial values of the service interval must be entered.
  Note
The adaptation channels 42, 43, 44, 45, will be automatically adapted once the dash panel insert has been coded.
Adaptation table for the service intervals:
   
Adaptation channelValid for vehiclesCounter contents
40QG1 and QG2 petrol
QG1 and QG2 diesel
QG0		the distance driven since the last inspection service (initial value = 0)
41QG1 and QG2 petrol
QG1 and QG2 diesel
QG0		the elapsed time since the last inspection service (initial value = 0)
42QG1 and QG2 petrol
QG1 and QG2 diesel		the minimum distance value which limits the service interval
43QG1 and QG2 petrol
QG1 and QG2 diesel
QG0		the maximum distance value which limits the service interval
44QG1 and QG2 petrol
QG1 and QG2 diesel
QG0		the maximum value of time which limits the service interval
45QG1 and QG2 petrol
QG1 and QG2 diesel		oil quality
46QG1 and QG2 petrolconsumed fuel (initial value = 0)
47QG1 and QG2 dieseloil smoke counter (initial value = 0)
48QG1 and QG2 dieselcounter of thermal oil load (initial value = 0)

Performing function 10 “Adaptation”
   
Readout on display:
–  Enter function 10 and confirm with key Q.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter the desired adaptation channel (adaptation table → Chapter)
  Note
After changing an adaptation value or ending an adaptation channel, it is once again necessary to enter the function 10 “Adaptation” in order to select another adaptation channel!
The distance driven since the last inspection service (distance in km)
The distance in km since the last inspection service can be entered with this channel, if the dash panel insert is replaced.
  
Adaptation
Enter channel number XX
Readout on display:
–  Enter function 40 and confirm with the key Q.
  
Adaptation
Enter channel number XX
Readout on display:
–  Press → key.
  
Channel 40    Adaptation  0          →  
Actual value INSP. in 100 km     (-↑ ↑-)
Readout on display:
–  Enter the driven value using the keypad, to do so fill in zero as the first digits.
Example:
A total distance driven of 6000 km since the last inspection service for the vehicle was calculated based on the defective dash panel insert.
–  Enter adaptation value 00060.
–  Confirm the entry with key Q.
Readout on display:
–  Confirm the entry with key Q.
  
Channel 40    Adaptation  0
Enter adaptation value XXXXX
Readout on display:
–  Confirm the entry with key Q.
  
Channel 40    Adaptation 60       Q
Actual value INSP. in 100 km     (-↑ ↑-)
Readout on display:
–  Press → key.
  
Channel 40    Adaptation 60       Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 40    Adaptation  60          →
Changed value stored
Readout on display:
The elapsed time since the last inspection service
The distance in days since the last inspection service can be entered with this channel, if the dash panel insert is replaced.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter channel number 41 and confirm with key Q.
  
Adaptation
Enter channel number XX
Readout on display:
–  Press → key.
  
Channel 41    Adaptation 0             →
Actual value INSP. in 1 day       (-↑ ↑-)
Readout on display:
–  Enter the elapsed time using the keypad, to do so fill in zero as the first digits.
Example:
An elapsed time of 87 days since the last inspection service for the vehicle was calculated based on the defective dash panel insert.
–  Enter adaptation value 00087.
–  Confirm the entry with key Q.
  
Channel 41    Adaptation  0
Enter adaptation value XXXXX
Readout on display:
–  Confirm the entry with key Q.
  
Channel 41    Adaptation 87       Q
Actual value INSP. in 1 day       (-↑ ↑-)
Readout on display:
–  Confirm the entry with key Q.
  
Channel 41    Adaptation 87       Q 
Store changed value?
Readout on display:
–  Press → key.
  
Channel 41    Adaptation 87             →
Changed value stored
Readout on display:
Adaptation of consumed fuel
Only QG1 and QG2 - petrol.
The value of the consumed fuel can be entered with this channel if the dash panel insert is replaced.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter channel number 46 and confirm with the key Q.
  
Adaptation
Enter channel number XX
Readout on display:
–  Press → key.
  
Channel 46    Adaptation 17             →
Consumption gauge in 1 liter     (-↑ ↓-)
Readout on display:
–  Enter adaptation value 00019.
–  Confirm the entry with key Q.
  
Channel 46  Adaptation  17
Enter adaptation value XXXXX
Readout on display:
–  Confirm the entry with key Q.
  
Channel 46   Adaptation 19             Q
Consumption gauge in 1 liter     (-↑ ↓-)
Readout on display:
–  Confirm the entry with key Q.
  
Channel 46   Adaptation 19             Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 46    Adaptation 19             →
Changed value stored
Readout on display:
Adaptation of the oil smoke
Only QG1 and QG2 - diesel.
The value of the oil smoke can be entered with this channel if the dash panel insert is replaced.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter channel number 47 and confirm with key Q.
  
Adaptation
Enter channel number XX
Readout on display:
–  Press → key.
  
Channel 47  Adaptation 0               →
Amount of soot in 100km              (-↑ ↓-)
Readout on display:
Value of the old dash panel insert 5000 km.
–  Enter adaptation value 00050.
–  Confirm the entry with key Q.
  
Channel 47  Adaptation  0
Enter adaptation value XXXXX
Readout on display:
–  Confirm the entry with key Q.
  
Channel 47  Adaptation 50             Q
Amount of soot in 100 km              (-↑ ↓-)
Readout on display:
–  Confirm the entry with key Q.
  
Channel 47  Adaptation 50             Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 47  Adaptation 50               →
Changed value stored
Readout on display:
Adaptation of thermal oil load
Only QG1 and QG2 - diesel.
The value of the thermal oil load can be entered with this channel if the dash panel insert is replaced.
  
Vehicle system test               HELP
Select function XX
Readout on display:
–  Enter channel number 48 and confirm with key Q.
  
Adaptation
Enter channel number XX
Readout on display:
–  Press → key.
  
Channel 48  Adaptation 0               → 
Thermal load in 100 km      (-↑ ↓-)
Readout on display:
Value of the old dash panel insert 5000 km.
–  Enter adaptation value 00050.
–  Confirm the entry with key Q.
  
Channel 48  Adaptation  0
Enter adaptation value XXXXX
Readout on display:
–  Confirm the entry with key Q.
  
Channel 48 Adaptation 0             Q
Thermal load in 100 km      (-↑ ↓-)
Readout on display:
–  Confirm the entry with key Q.
  
Channel 48 Adaptation 50             Q
Store changed value?
Readout on display:
–  Press → key.
  
Channel 48  Adaptation 50               →
Changed value stored
Readout on display:
  
Vehicle system test               HELP 
Select function XX

Input values when changing the dash panel insert > < Adaptation