| –
| Separate 3-pin plug connection and remove pressure switch -B- (5 Nm). |
| –
| Replace -O--ring seal -A- (10.8 mm; 1.8 mm). |
| Installation is performed in the reverse order, pay attention to the following points: |
Note | The refrigerant circuit remains closed, connection to valve. |
| Inspect proper operation: |
| The high pressure sensor -G65- is an information transmitter for the radiator fan control unit -J293- and for the engine control unit. It can only be checked via self-diagnosis of the engine control unit → Engine; Rep. Gr.01 self-diagnosis. |
|
|
|
