Octavia Mk1
| Fitting location of shift mechanism |
| A - | Shift cable for shift movement |
| B - | Selector cable for selector movement |
| C - | Heat shield |
| q | take off before removing the shift mechanism. |
| Arrow -A- Shift movement |
| Arrow -B- Selector movement |
| 1 - | Gearbox shift lever |
| 2 - | Reversing lever with driver/selector cable |
Note| t | On models fitted with a coded radio set, pay attention to the coding. |
| t | Disconnect earth strap at battery before carrying out work on the shift mechanism in the engine compartment → Electrical System → Rep. Gr.27. |
| t | When the battery is reconnected, pay attention to the work after connecting the battery → Electrical System → Rep. Gr.27. |
| t | Do not kink the control cables. |
| t | Remove complete shift mechanism for replacing the control cables → Chapter. |
| t | Grease all bearing and contact surfaces with Polycarbamide Grease -G 052 142 A2-. |
| I - | Summary of components - removing and installing control cables → Chapter |
| II - | Summary of components - repairing shift housing → Chapter |
| III - | Summary of components - repairing shift lever → Chapter |
| Removing and installing shift mechanism → Chapter |
| Setting the shift mechanism → Chapter |
|
