Mounting sequence - disassembling and assembling the angle gearbox |
Special tools and workshop equipment required |
t
| Pressure plate -MP3-406 (VW 401)- |
t
| Pressure plate -MP3-407 (VW 402)- |
t
| Pressure spindle -MP3-408 (VW 412)- |
t
| Pipe section -MP3-414 (VW 516)- |
t
| Multi-purpose tool -MP3-419 (VW 771)- |
t
| Pressure spindle -MP3-423 (VW 407)- |
t
| Bushing -MP3-424 (30-21)- |
t
| Pressure spindle -MP3-448 (VW 408 A)- |
t
| Pressure spindle -MP3-449 (VW 409)- |
t
| Thrust piece -MP3-458/1 (VW 472/1)- |
t
| Thrust plate -MP3-467 (40 - 105)- |
t
| Thrust piece -MP3-468 (2007)- |
t
| Assembly device -MP6-414 (3253)- |
t
| Assembly stand -MP9-101- |
t
| Extraction cups for secondary shaft bearing -T30067 (VW 470)- |
t
| Gearbox mount -T30097 (T10108)- or gearbox mount -T30012 (3221)- |
t
| Stop plate -T30097/1 (T10108/1)- |
t
| Tapered-roller bearing extractor -V.A.G 1582- |
t
| Interior extractor 8...12 mm, e.g. -Kukko 21/02- |
t
| Interior extractor 14.5...18.5 mm, e.g. -Kukko 21/2- |
t
| Interior extractor 23.5...30 mm, e.g. -Kukko 21/4- |
t
| Interior extractor 56...110 mm, e.g. -Kukko 21/89- |
t
| Separating device 22...115 mm, e.g. -Kukko 17/2- |
t
| Countersupport, e.g. -Kukko 22/1- |
t
| Countersupport, e.g. -Kukko 22/4- |
t
| Two-arm extractor e.g. -Kukko 20/10- with pull-off hooks -Matra V/170- |
t
| Three armed extractor e.g. -Kukko 45-2- |
t
| Sealant -AMV 188 200 03- |
t
| Locking agent -D 000 600 A2- |
t
| Sealing grease -G 052 128 A1- |
|
|
|