skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Disassembling the rear final drive > < Removing and installing cover for Haldex coupling of plate housing

Octavia Mk1

Mounting sequence - disassembling and assembling the rear final drive
Mounting sequence - disassembling and assembling the rear final drive
Remove and install cover for Haldex coupling with plate housing, plate package, secondary shaft housing/shank bevel gear, head bevel gear/drive shaft and differential gear.
Special tools and workshop equipment required
t  Pressure plate -MP3-407 (VW 402)-
t  Pressure spindle -MP3-408 (VW 412)-
t  Multi-purpose tool -MP3-419 (VW 771)-
t  Extraction hook -MP3-419/37 (771/37)-
t  Gearbox mount -MP3-501- or gearbox mount -T30109 (VW 353)- with retaining plate -T30108-
t  Assembly device -MP6-414 (3253)-
t  Removal tool for the inner lining of the door panel-MP8-602/1-
t  Assembly stand -MP9-101-
t  Hook -3438-
t  Thrust piece -T10019-
t  Extractor -T10037-
t  Key -T10066-
t  Catch pan
t  Locking agent -D 197 300 A1-
t  2 hexagon screws M 10 x 20
   
Change gearbox holder -MP3-501-
  Note
Before fastening the rear final drive, the gearbox holder -MP3-501- must be reworked in accordance with the dimensions stated below.
  S34-0309
A =
B =
Ø C =		259.0 mm
36.0 mm
13.0 mm

   

Disassembling the rear final drive > < Removing and installing cover for Haldex coupling of plate housing