skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Pre-load setting of tapered roller bearing for head bevel gear (friction torque) > < Determining the thickness of adjusting washer "S3”

Octavia Mk1

Setting head bevel gear
Setting head bevel gear
Special tools and workshop equipment required
t  Gauge block plate -MP3-405/17 (VW 385/17)-
t  Universal dial gauge holder -MP3-447 (VW 387)-
t  Setting device for crown wheel -MP3-462/4 (VW 521/4)- with bushing -MP3-462/12 (VW 521/12)-
t  Assembly stand -MP9-101-
t  Gauge handle, adjustable -T30014 (VW 388)-
t  Gearbox mount -T30097 (T10108)-
t  Dial gauge
The head bevel gear must be re-set when the following components are replaced:
t  Final drive housing
t  Cover
t  Tapered-roller bearing for head bevel gear/drive shaft
or
t  Drive train
Setting overview → Chapter.
   

Pre-load setting of tapered roller bearing for head bevel gear (friction torque) > < Determining the thickness of adjusting washer "S3”