skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Aligning exhaust system free of stress > < Removing and installing the exhaust manifold - Engines with identification characters AVU, BFQ

Octavia Mk1

Replace middle and rear silencer
Replace middle and rear silencer
Special tools and workshop equipment required
t  Body saw e.g. -V.A.G 1523-
A separation point is provided for repair purposes for replacing the middle or rear silencer.
   
–  Use body saw, e.g. -V.A.G 1523-, to separate exhaust pipe at right angles at separation point -arrow 2-.
–  When installing, position clamping sleeve -4- at the side markings -arrow 1- and -arrow 3-.
–  Align exhaust system free of stress → Chapter
–  Align rear silencer horizontally.
–  Tighten nuts of clamping sleeve evenly to 40 Nm.
Installation position of clamping sleeve: horizontally in vehicle, bolted connections pointing forward.
  A26-0130

Aligning exhaust system free of stress > < Removing and installing the exhaust manifold - Engines with identification characters AVU, BFQ