skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Assembling together > < Summary of components

Octavia Mk2

Dismantling
Dismantling
Special tools and workshop equipment required
t  Pressure plate -MP3-406 (VW 401)-
t  Pressure plate -MP3-407 (VW 402)-
t  Pressure washer -MP3-455 (VW 447 H)-
t  Pressure spindle -MP3-448 (VW 408 A)-
t  Pressure spindle -MP6-405 (VW 411)-
t  Pipe section -MP3-4012 (VW 416 B)-
t  Circlip pliers, e.g. -VW 161A-
t  Hose strap pliers, e.g. -V.A.G 1275 -
t  Assembly device -T10065-
Removing and installing outer joint → Chapter
–  Open both warm-type clamps at inner joint and push back the joint boot.
–  Remove the joint part from the drive shaft.
   
–  Remove circlip with circlip pliers-1-.
–  Insert the drive shaft in the press.
  S40-0148
–  Press tripod spider off the drive shaft.
–  Remove the joint boot from the shaft.
–  Clean the shaft, the joint part and the slot for the gasket ring.
  S40-0234

Assembling together > < Summary of components