| Repairing outer CV joints RF90, UF100, UF107, RO104, RO3700 |
| Designation, distinguish the diameter as specified and grease quantity for joints → Chapter |
| The types of joints must be distinguished according to the diameter → Chapter. |
Note | t
| Before removing the joints and the joint boots, thoroughly clean their surrounding. |
| t
| When disassembling the joint, remove the old lubricant and any dirt present. |
| t
| Clean the joint with great care. |
| t
| Dispose of old lubricant and cleaning agent in compliance with the applicable regulations. |
| t
| Place removed and cleaned parts on a clean surface and if necessary cover. Do not use fuzzy cloths! |
| t
| Carefully cover removed parts if the repair is not completed immediately. |
| t
| Only install clean parts: Remove spare parts from their wrapping immediately before installing. Do not use any parts which have been stored unwrapped (e.g. on a shelf or in a tool box etc...). |
|
|
|
