| –
| Drill a hole Ø 3 mm -arrow- into the outer pipe of the shock absorber. |
Note | Gas will escape during drilling. |
| –
| Position a pipe cutter, e.g. Stahlwille Express -150/3-, as shown in the figure, and cut through the outer pipe of the shock absorber. |
| –
| Pull the piston rod upwards and while doing so grip the inner pipe with pliers and press it down in such a way that it remains in the outer pipe when the piston rod is slowly pulled up. |
| –
| Pull the piston rod out of the inner pipe. |
| –
| Empty the shock absorber pipe. |
|
|
|
Caution
