Octavia Mk2
| Summary of components for electro-mechanical steering gear - RHD vehicles with aluminium assembly carrier |
| 1 - | Universal joint |
| 2 - | Screw, 30 Nm |
| q | M8 x 32 |
| q | replace after each removal |
| 3 - | Electrical line |
| 4 - | Cover plate |
| 5 - | Screw, 6 Nm |
| 6 - | Power-steering gear |
| q | with power-assisted steering control unit -J500- |
| q | can be checked in the guided fault detection system with → Vehicle diagnostic tester |
| Vehicles as of CW 22/08 |
| q | The 3rd generation power-assisted steering |
| q | the steering angle sender -G85- is integrated in the steering gear and cannot be replaced separately |
| q | with three point fixing at assembly carrier |
| 7 - | Wheel bearing housing → Chapter |
| 8 - | Nut, 20 Nm + 90° |
| q | self-locking |
| q | replace after each removal |
| 9 - | Screw, 50 Nm + 90° |
| q | M10 x 76 |
| q | replace after each removal |
| 10 - | Assembly carrier with consoles |
| 11 - | Wheel bearing housing → Chapter |