Octavia Mk2
| Summary of components of lock carrier with attached parts |
| 1 - | 20 Nm |
| 2 - | Lock carrier |
| Removing: |
| – | Remove front bumper bracket (Pos. 10). |
| – | Separating Bowden wire for bonnet release → Chapter. |
| – | Disconnect plug from switch for flap lock. |
| – | Remove screws (Pos. 7). |
| – | Remove screws (Pos. 1) and loosen the radiator and the condenser from the lock carrier. |
| – | Secure the radiator and the condenser in the engine compartment. |
Note| t | Do not suspend the condenser to the wires. |
| t | Do not fold the condenser wires. |
| Installing: |
| – | Installation is carried out in the reverse order. |
| 3 - | Adjusting nut |
| 4 - | 3.5 Nm |
| 5 - | Radiator support |
| 6 - | Air deflector |
| 7 - | 4.5 Nm |
| 8 - | 9 Nm |
| 9 - | Headlight carrier |
| 10 - | Front bumper bracket |
| q | Removing and installing → Chapter. |
