skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Door adjustment > < Summary of components of front door

Octavia Mk2

Removing and installing the door
Removing and installing the door
  WARNING
Safety precautions are to be applied when handling pressure sensor for side impact → Chapter.
Removing:
–  Disconnect battery earth strap → Electrical System → Rep. gr.27.
   
–  Pull off the bellows -6- from pillar A.
–  Separate electrical plug connections -4-.
–  Remove the nuts -2- from the hinges -1-.
–  Remove screw -5- from the door arrester -3-.
–  Hook out the door upwards.
Installing:
–  Installation is carried out in the reverse order; pay attention to the following points:
  S57-0141
–  Remove bellow bracket -2- from pillar A.
–  Insert bellow bracket -2- in the bellows -1- and install bracket with bellows in the pillar A.
  Note
In the event of damage replace bellow bracket -2- with a new original part.
  WARNING
Pay attention to the sequence when connecting the battery → Electrical System → Rep. gr.27.
  S57-0158

Door adjustment > < Summary of components of front door