skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

Removing and installing driver airbag unit > < Safety precautions when carrying out repairs on the airbag system
Replacing parts of the airbag system
Replacing parts of the airbag system
Accident with deployment of airbag
The following parts should always be replaced with new original parts:
t  Central control unit for airbag system VW 52 1).
t  Central control unit for airbag system VW 8 2).
t  Driver side airbag unit 3).
t  Front passenger side airbag unit 3).
t  Side airbag unit on the driver's side 3).
t  Side airbag unit on the front passenger side 3).
t  Seat cover 4).
t  Driver side head airbag unit 3).
t  Passenger side head airbag unit 3).
t  Top trim panel of pillar A 5).
t  Top trim panel of pillar B 5).
t  Top trim panel of pillar C 5).
t  Moulded headliner 5).
t  Restoring ring with slip ring 6).
t  Driver side seat belt tensioner with seat belt 3).
t  Front passenger side seat belt tensioner with seat belt 3).
t  Seat belt tensioners with seat belts for the rear seats 3).
1) In the event of ignition of the front airbag units and seat belt tensioner.
2) If the front and side airbag unit or head airbag unit and seat belt tensioner has ignited the control unit may again be used - up to three times.
3) In the event of ignition.
4) In the event of ignition of the side airbag unit.
5) In the event of ignition of the head airbag unit.
6) In the event of ignition of the driver airbag unit.
Replace all damaged parts if necessary (visual inspection) with new original parts.
If the airbag control unit and other damaged parts are replaced it is necessary to code the control unit again.
Accident without deployment of airbag unit
t  There is no need to replace any parts of the airbag system if the airbag warning light (K75) does not signal any fault and if no parts of the airbag system are damaged. Pay special attention to examining the seat belts.
Registering parts of the airbag system
If a part of the airbag system is to be replaced using original parts the self-adhesive labels with the number should be removed, placed on registration card ET no. 000 010 100 A and sent in for registration to the customer service network (domestic) or the importer (in the case of other countries):
t  Central control unit for the airbag system
t  Driver airbag unit
t  Passenger-side airbag unit
t  The side airbag unit on the driver's side with the seat cover
t  The side airbag unit on the front passenger's side with the seat cover
t  Acceleration sensor for side impact on the driver's side
t  Acceleration sensor for side impact on the front passenger's side
t  Pressure sensor for side impact on the driver's side
t  Pressure sensor for side impact on the front passenger's side
t  The head airbag unit on the driver's side
t  The head airbag unit on the front passenger's side
t  Ceiling for the head airbag
   

Removing and installing driver airbag unit > < Safety precautions when carrying out repairs on the airbag system