–
| Lower door window until adjusting pin -2- and straddling dowel -3- can be reached in the assembly carrier opening. |
–
| Screw an M5 screw (approximately 70 mm long) into the adjusting pin -2- and remove from straddling dowel -3-. |
–
| Screw an M8 screw (approximately 80 mm long) into the straddling dowel -3-. |
Note Do not use excessive force when screwing the screw into the straddling dowel as it may fall into the door. |
–
| Withdraw the straddling dowel from the window lifter guide and hence from the door window pane. |
–
| Push door window upwards and secure (e.g. with adhesive tape). |
|
|
|