Octavia Mk2
| Assembly overview of covers and upholstery for rear seat bench |
| 1 - | Plastic cord |
| q | Sewn to cover (Pos. 8). |
| q | With holes for inserting the retaining clips (Pos. 2). |
| 2 - | Clamp |
| q | When removing cut through with pliers |
| q | To install use upholstery pliers e.g. -V.A.G 1634-. |
| 3 - | Wire |
| q | Sewn onto foam padding (Pos. 6). |
| 4 - | Heating element |
| (if present) |
| 5 - | Plug connection |
| (if present) |
| 6 - | Foam padding |
| 7 - | Rack |
| 8 - | Cover |
| Removing: |
| – | Removing rear seat bench → Chapter. |
| – | Cut through the upholstery retaining clips (Pos. 2) and remove foam padding (Pos. 6) with cover from rack (Pos. 7). |
| – | Cut through the upholstery retaining clips (Pos. 2) and remove cover from foam padding (Pos. 6). |
| Installing: |
Note| When installing the cover, use upholstery clip pliers e.g. -V.A.G 1634-. |
| – | Installation is carried out in the reverse order. |
