Skoda Workshop Service and Repair Manuals > Octavia Mk2 > Body | Body Work | Trim, noise insulation | Pillar and side trim panels | Removing and installing top trim panel of pillar B (vehicles without head airbag)

Removing and installing top trim panel of pillar B (vehicles without head airbag)

Removing:

–	Remove bottom trim panel of pillar B → Chapter.

–	Release screw -1- (45 Nm).

–	Loosen the bottom deflection fitting (Pos. 2).

–	First loosen the top trim panel of pillar B (Pos. 1) on the sides from the door seal and then unclip the clips in the upper area of pillar B.

–	Pull the seat belt (Pos. 2) through the top trim panel of pillar B (Pos. 1).

Installing:

–	Installation is carried out in the reverse order; pay attention to the following points:

–	Recondition the clips (Pos. 1) in the top trim panel of pillar B (Pos. 2), if necessary replace with new ones.

Skoda Workshop Service and Repair Manuals