Octavia Mk2
|
Summary of components of brake pedal up to 01/07 (with brake light switch -F- and brake pedal switch -F47- at bracket) |
Grease all bearing surfaces with polycarbamide grease -G 052 142 A2- before assembly. |
1 - | Brake servo unit |
q | Assignment → Electronic Catalogue of Original Parts |
2 - | Screw |
q | up to 01/07 |
3 - | Support |
q | up to 01/07 |
4 - | Nut, 12 Nm |
q | up to 01/07 |
5 - | Screw, 25 Nm |
6 - | Brake light switch -F- and brake pedal switch -F47- |
Note
Mounted on vehicles until 10.05. From 11.05 the brake light switch -F- and the brake pedal switch -F47- are mounted onto the master brake cylinder → Chapter. |
q | before assembling the brake light switch, clip the brake pedal to the pressure rod of the brake servo unit → Chapter |
q | Grease tappet head with polycarbamide grease -G 052 142 A2-. |
q | Setting the brake light switch → Chapter |
7 - | Nut, 25 Nm |
8 - | Bearing bracket |
q | up to 10.05, mounted together with brake light switch -F- and brake pedal switch -F47- |
q | further mounted up to 01/07 without brake light switch -F- and brake pedal switch -F47- |
q | Assignment → Electronic Catalogue of Original Parts |
9 - | Self-locking nut, 25 Nm |
10 - | Brake pedal |
11 - | Cap |
12 - | Bearing shell |
13 - | Support |
q | for ball head of pressure rod of brake servo unit |
14 - | Screw |
15 - | Bushing |
16 - | Bearing bolt |
17 - | Front wall |
18 - | Screw, 25 Nm |
q | serves, at the same time, to secure the brake master cylinder and the brake servo unit. |
Summary of components of brake pedal as of 02/07 (with brake light switch -F- and brake pedal switch -F47- at brake cylinder) |
Grease all bearing surfaces with polycarbamide grease -G 052 142 A2- before assembly. |
1 - | Brake servo unit |
q | Assignment → Electronic Catalogue of Original Parts |
2 - | Screw, 25 Nm |
3 - | Nut, 25 Nm |
4 - | Bearing bracket |
q | as of 02/07 |
q | Assignment → Electronic Catalogue of Original Parts |
5 - | Self-locking nut, 25 Nm |
6 - | Brake pedal |
7 - | Cap |
8 - | Bearing shell |
9 - | Support |
q | for ball head of pressure rod of brake servo unit |
10 - | Screw |
11 - | Bushing |
12 - | Bearing bolt |
13 - | Front wall |
14 - | Screw, 25 Nm |
q | serves, at the same time, to secure the brake master cylinder and the brake servo unit. |