Removing and installing brake caliper Bosch BIRIII |
Special tools and workshop equipment required |
t
| Brake pedal load, e.g. -V.A.G 1869/2- |
The procedure applies only for the replacement or for the following repair work on the brake caliper. |
–
| Detach the hand brake cable from the lever on the brake caliper. |
–
| Remove spring clip and pull hand brake cable out of the brake caliper holder. |
–
| Fit the bleeder hose of the bleeding bottle onto the bleeder screw of the brake caliper and open the bleeder screw. |
–
| Insert brake pedal load, e.g. -V.A.G 1869/2- |
–
| Close the bleeder screw and remove the bleeding bottle. |
–
| Unscrew the brake line. |
|
|
|