Octavia Mk2
| Fuel tank - Summary of components |
| 1 - | Mounting part |
| 2 - | Screw cap |
| q | replace if damaged |
| 3 - | Earth connection |
| q | pay attention to locating element |
| 4 - | 11 Nm |
| 5 - | Guide |
| 6 - | 25 Nm |
| q | replace |
| 7 - | Fuel tank |
| q | removing and installing → Chapter |
| 8 - | Circlip |
| 9 - | Bracket for the exhaust system |
| 10 - | Tensioning strap |
| q | Check fitting position |
| 11 - | Cover plate |
| 12 - | Feed line |
| q | to fuel rail |
| q | check for firm seating |
| 13 - | Fuel filter |
| q | Fitting position: arrow points in direction of flow |
| 14 - | Vent line |
| q | clipped in place on the side of the fuel tank |
| q | check for firm seating |
| 15 - | Sealing ring |
| q | replace |
| q | to be inserted dry into the opening of the fuel tank |
| q | only moisten the inner seal of the flange with fuel for fitting purposes |
| 16 - | Fuel delivery unit |
| q | removing and installing → Chapter |
| q | Check fuel delivery unit → Chapter |
| q | note the correct installed position in the fuel tank → Fig. |
| q | with sender for fuel gauge display -G - |
| q | Removing and installing the sender for fuel gauge display -G- → Chapter |
| q | Clean strainer if dirty |
| 17 - | Lock ring, 110 Nm |
| q | check for firm seating |
| q | use wrench -T30101 (3087)- for removing and installing |
| 18 - | Feed line |
| q | black |
| q | clipped in place on the side of the fuel tank |
| q | check for firm seating |
| 19 - | Return-flow line |
| q | blue |
| q | clipped in place on the side of the fuel tank |
| q | check for firm seating |
| 20 - | Fuel pump control unit -J538 - |
| q | after replacing, adapt the engine control unit -J623 - to the fuel pump control unit -J538- → Vehicle diagnosis, testing and information system VAS 5051 |
| q | check → Vehicle diagnosis, testing and information system VAS 5051 |
| 21 - | Fuel tank lid unit |
| q | with rubber bowl |
| q | removing and installing → Body Work → Rep. Gr.55 |
Note
