skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
1.8/112; 118 kW TSI; 2.0/147 kW TSI engine > < Removing and installing ignition coils with power output stages

Octavia Mk2

Removing and installing engine speed senderG28
Removing and installing engine speed sender -G28-
Special tools and workshop equipment required
t  Socket insert -T10370-
Removing
The fitting location of the engine speed sender -G28- is located below the intake manifold at the sealing flange -gearbox side-.
   
–  Disconnect plug -1- from the engine speed sender -G28-.
–  Take out the gasket -2- from the cylinder block and remove the engine speed sender -G28- with the socket insert -T10370-.
Install
–  Install engine speed sender -G28- and tighten the fixing screw to 5 Nm.
Further installation occurs in a similar way in reverse order to removal.
  N13-10291

1.8/112; 118 kW TSI; 2.0/147 kW TSI engine > < Removing and installing ignition coils with power output stages