| –
| Place the extractor -T10094A- in -direction of arrow- on the ignition coil with power output stage. |
| –
| Slightly pull the ignition coil with power output stage out of the cylinder head. |
| –
| Position the assembly tool -T10118- as shown. |
| –
| Carefully release the plug lock and disconnect the plug. |
| –
| Completely pull ignition coil with power output stage out of the cylinder head. |
| –
| Place the extractor -T10094A- on the ignition coil with power output stage. |
| –
| Insert ignition coil with power output stage into the ignition coil channel. |
| –
| Push the plug onto the ignition coil with power output stage until it audibly clicks into place. |
| –
| Press the ignition coil with power output stage with extractor -T10094A- onto the spark plug in the cylinder head. |
|
|
|
