| –
| Check dimensions on the right hanger for engine and gearbox: |
| l
| Both bolt heads -2- must be positioned parallel to the edge of the supporting arm -3- for engine mount. |
| l
| Between engine bracket -1- and engine support -4- there must be a distance -x- = 10 ... 13 mm. |
Note | The distance -x- can be checked e.g. with suitable round bars. |
| Only if there is an acoustic complaint (engine or gearbox knock on the frame side rail when cornering) and the dimension -a- is outside 10 ... 13 mm: |
|
|
|
