Octavia Mk2
| Fuel tank for vehicles with four-wheel drive - Summary of components |
| 1 - | Feed line |
| q | black |
| q | check for firm seating |
| 2 - | Return-flow line |
| q | blue |
| q | check for firm seating |
| 3 - | Sealing ring |
| q | replace |
| q | insert dry into the opening of the fuel tank |
| q | only moisten the inner seal of the flange with fuel for fitting purposes |
| 4 - | Fuel delivery unit |
| q | removing and installing for vehicles up to MY 2008 → Chapter |
| q | removing and installing for vehicles as of MY 2009 → Chapter |
| q | inspecting fuel pump → Chapter |
| q | note the installed position of the fuel tank → Fig. |
| q | with sender for fuel gauge display -G - |
| q | Removing and installing the sender for fuel gauge display -G- → Chapter |
| q | If strainer is dirty - clean |
| 5 - | Lock ring, 110 Nm |
| q | check for firm seating |
| q | use wrench -T30101 (3087)- for removing and installing |
| 6 - | Fuel pump control unit -J538- |
| q | after replacing, adapt the engine control unit -J623 - to the fuel pump control unit -J538- → Vehicle diagnosis, testing and information system VAS 5051 |
| q | check → Vehicle diagnosis, testing and information system VAS 5051 |
| 7 - | Screw cap |
| q | replace if damaged |
| 8 - | Fixing screw |
| 9 - | Fuel tank lid unit |
| q | with rubber bowl |
| q | Removing and installing → Body Work; Rep. Gr.55 |
| 10 - | Earth connection |
| q | check for firm seating |
| 11 - | 11 Nm |
| 12 - | Ventilation for fuel delivery |
| 13 - | Connector |
| q | for fuel gauge sender -2- -G169- |
| 14 - | Fuel gauge sender -2- -G169- |
| q | removing and installing → Chapter |
| 15 - | Suction spray pump |
| q | clipped in place on fuel gauge sender -2- -G169- |
| q | removing and installing → Chapter |
| 16 - | Ventilation for fuel delivery |
| 17 - | Vent line |
| 18 - | Fuel tank |
| q | removing and installing → Chapter |
| 19 - | Tensioning strap |
| q | Check fitting position |
| 20 - | 25 Nm |
| q | replace |
| 21 - | 23 Nm |
| 22 - | Shield |
| q | riveted together with hanger of exhaust system |
| 23 - | 3 Nm |
| 24 - | Fuel filter |
| q | Summary of components → Chapter |
| 25 - | Vent line |
| q | clipped in place on the side of the fuel tank |
| q | check for firm seating |
Note
