skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
High pressure pump > < Air filter - Summary of components

Octavia Mk2

Removing and installing air filter housing
Removing and installing air filter housing
Special tools and workshop equipment required
t  Pliers for spring strap clamps
Removing
  Note
For the following work it is advantageous to disconnect the intake hose from the intake manifold.
–  Remove engine cover.
   
–  Remove cover for air intake pipe, to do so release lateral retaining clasps -arrows-.
  A10-10367
–  Release screws -arrows- for the air intake connection -1- and take connecting hose -2- out of the guide.
–  Remove air intake pipe -1-.
  S23-0230
–  Disconnect plug -2- from air mass meter -G70- and intake air temperature sender 2 -G299-.
–  Open the spring strap clip -1- and pull off.
–  Screw out screw -3-.
–  Slacken two drifts of the air filter housing and remove it to the top from under the upper coolant hose.
Install
–  Installation is carried out in the reverse order.
  S24-0680

High pressure pump > < Air filter - Summary of components