Octavia Mk2
Summary of components for engine with engine identification characters BJB, BKC, BXE |
1 - | Top coolant hose |
q | To connection fitting at cylinder head |
2 - | O-ring |
q | replace |
3 - | Radiator |
q | removing and installing → Chapter |
q | after replacing fill entire system with fresh coolant |
4 - | Gasket |
5 - | Screw cap |
6 - | Connector |
7 - | 2 Nm |
8 - | Expansion reservoir |
q | Check the cooling system for tightness → Chapter |
q | Test pressure 0.14...0.16 MPa (1.4...1.6 bar) |
9 - | 5 Nm |
10 - | 10 Nm |
11 - | Right radiator fan -V35- |
q | remove and install Superb II → Chapter, Octavia II → Chapter |
12 - | Radiator fan -V7- |
q | with radiator fan control unit -J293- |
q | remove and install Superb II → Chapter, Octavia II → Chapter |
13 - | Fan shroud |
14 - | Bottom coolant hose |
q | To connection fitting at coolant regulator |
15 - | Retaining clip |
16 - | Coolant temperature sender at radiator outlet -G83- |
q | replace the O-ring if it is damaged |