Octavia Mk2
Summary of components for engine with identification characters BJB |
1 - | to the compensation bottle above |
q | Connection diagram for coolant hoses Superb II → Chapter, Octavia II → Chapter |
2 - | Top coolant pipe |
q | screwed onto the cylinder head cover |
3 - | O-ring |
q | replace |
4 - | Retaining clip |
q | check tightness |
5 - | Coolant temperature sender -G62- |
6 - | to heat exchanger |
q | Feed line |
q | Connection diagram for coolant hoses Superb II → Chapter, Octavia II → Chapter |
7 - | Connection fittings |
q | for cylinder head |
8 - | 10 Nm |
9 - | to heat exchanger |
q | Return-flow line |
q | Connection diagram for coolant hoses Superb II → Chapter, Octavia II → Chapter |
10 - | 40 Nm |
11 - | Distributor part |
12 - | towards top radiator |
q | Connection diagram for coolant hoses Superb II → Chapter, Octavia II → Chapter |
13 - | 15 Nm |
14 - | to bottom compensation bottle |
q | Connection diagram for coolant hoses Superb II → Chapter, Octavia II → Chapter |
15 - | Coolant pipe |
16 - | to bottom radiator |
q | Connection diagram for coolant hoses Superb II → Chapter, Octavia II → Chapter |
17 - | Connection fittings |
q | for coolant regulator |
18 - | Coolant regulator |
q | removing and installing → Chapter |
q | check: heat up regulator in a water bath |
q | Start of opening approx. 87 °C |
q | Full opening approx. 102°C |
q | Stroke min. 7 mm |
19 - | Oil cooler |
q | removing and installing → Chapter |
20 - | Coolant pump |
q | check smooth operation |
q | Check fitting position |
q | removing and installing → Chapter |