skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Enginecrankshaft group, pistons > < Adjusting the unit mounting

Octavia Mk2

Assembly bracket
Assembly bracket
   
Unit mounting for engine
1 = 20 Nm + torque a further 90° (1/4 turn)
   Replace bolts
2 = 40 Nm + torque a further 90° (1/4 turn)
   Replace bolts
3 = 60 Nm + torque a further 90° (1/4 turn)
   Replace bolts
  S10-0347
Assembly bracket of gearbox 02S and 09G
A = 40 Nm + torque a further 90° (1/4 turn)
   Replace bolts
B = 60 Nm + torque a further 90° (1/4 turn)
   Replace bolts
  S10-0348
Assembly bracket gearbox 02Q
1 = 40 Nm + torque a further 90° (1/4 turn)
   Replace bolts
2 = 60 Nm + torque a further 90° (1/4 turn)
   Replace bolts
  S10-0302
Pendulum support
Screw -A- strength category 8.8 = 40 Nm + torque a further 90° (1/4 turn)
   Replace bolts
Screw -A- strength category 10.9 1) = 50 Nm + torque a further 90° (1/4 turn)
   Replace bolts
Screw -B- = 100 Nm + torque a further 90° (1/4 turn)
   Replace bolts
Remove: First release screw -B-, then screws -A-.
Install: First tighten screws -A-, then screw -B-.
  S10-0349
1) On manual gearbox MQ350 (02Q), only use the screws with the strength category 10.9 if threaded inserts have been installed (e.g. HeliCoil) -arrow-.
  N34-10980

Enginecrankshaft group, pistons > < Adjusting the unit mounting