Octavia Mk2
| Oil filter holder with component parts - Summary of components, engine identification character BWA |
| 1 - | Pipe |
| q | for crankcase ventilation |
| 2 - | Oil pressure switch -F1 -, 20 Nm |
| q | 0.14 MPa (1.4 bar) black |
| q | two-pin |
| q | check → Chapter |
| 3 - | Support |
| 4 - | 25 Nm |
| 5 - | Oil cooler |
| q | pay attention to the notes → Chapter |
| q | ensure clearance to surrounding components |
| q | connection diagram for coolant hoses → Chapter |
| 6 - | Gasket |
| q | replace |
| 7 - | 15 Nm + torque a further 90° (1/4 turn) |
| q | replace |
| 8 - | Sealing ring |
| q | replace |
| 9 - | Dust cap |
| 10 - | Oil filter housing, 25 Nm |
| q | removing and installing with oil filter wrench |
| q | empty → Chapter |
| 11 - | Oil filter element |
| q | empty oil filter housing → Chapter before removing |
| 12 - | Baffle |
| 13 - | Gasket |
| q | replace |
| 14 - | Oil filter holder |
| q | with pressure relief valve approx. 0.4 MPa (4 bar) |
| q | removing and installing → Chapter |
