skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Installing and setting > < Removing and installing balancing shaft module with oil pum

Octavia Mk2

Removing
Removing
–  Removing the oil pan → Chapter.
   
–  Remove chain guard. Release catch pegs if necessary through the openings -arrows- using a small screwdriver.
  S17-0146
–  Release the screw from the chain sprocket of the oil pump. While doing so counterhold on the central screw of the crankshaft.
  Caution
The chain sprocket for driving the balancing shafts must not be loosened!
  S17-0147
–  Release the tension of the chain rail with a screwdriver -arrow- and interlock it with a socket wrench -1-, wrench size 3 mm.
  S17-0148
–  Remove the chain sprocket of the oil pump and remove the chain from the chain sprocket of the balancing shaft.
  S17-0149
–  Release the screws -arrows- of the balancing shaft module from the outside to the inside and remove the balancing shaft module.
–  Remove the intermediate plate.
  S17-0150

Installing and setting > < Removing and installing balancing shaft module with oil pum