Octavia Mk2
Exhaust manifold with catalytic converter - Summary of components |
The Positions -1- to -4- are not fitted for engine identification characters BVY. |
1 - | Clamp |
2 - | 10 Nm |
3 - | Cable guide |
q | for lambda probe |
4 - | Lambda probe 2 -G108-, 55 Nm |
q | upstream of catalytic converter, left exhaust pipe |
q | the thread of new lambda probes must be coated with assembly paste |
q | for re-used lambda probe, only coat the thread with hot bolt paste -G 052 112 A3-; the hot bolt paste -G 052 112 A3- must not get into the slots of the probe body |
q | Colour of the plug: brown |
5 - | Heat shield |
6 - | 10 Nm |
7 - | Lambda probe -G39-, 55 Nm |
q | upstream of catalytic converter, right exhaust pipe |
q | the thread of new lambda probes must be coated with assembly paste |
q | for re-used lambda probe, only coat the thread with hot bolt paste -G 052 112 A3-; the hot bolt paste -G 052 112 A3- must not get into the slots of the probe body |
q | Colour of the plug: black |
8 - | Cable strap |
9 - | 40 Nm |
10 - | 23 Nm |
11 - | Support for exhaust manifold |
q | right |
12 - | Strut |
q | between the flanges |
13 - | Gasket |
q | replace |
14 - | Support for exhaust manifold |
q | left |
15 - | 25 Nm |
16 - | Exhaust manifold with catalytic converter |
q | Coat pin screws of exhaust manifold with hot bolt paste -G 052 112 A3- |
q | removing and installing → Chapter |
17 - | 25 Nm |
q | replace |
q | Coat stud bolts in the cylinder head with hot bolt paste -G 052 112 A3- |
18 - | Gasket |
q | replace |
19 - | Bottom connection pipe |
q | of exhaust gas recirculation system |
20 - | Support |
q | for cable guide clamp |