skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Hose connections with push-fit couplings > < Charge air cooling - Summary of components

Octavia Mk2

Removing and installing charge air cooler
Removing and installing charge air cooler
Removing
–  Remove radiator → Chapter.
   
–  Remove the charge air hoses on the left and right -arrows- from the charge air cooler.
–  Unscrew fixing screws for charge air cooler on right and left ( → Chapter, Pos. 1).
  WARNING
Do not open the refrigerant circuit of the air conditioning system.
  Caution
In order to avoid damage to the condenser as well as to the refrigerant lines and hoses, ensure that the lines and hoses are not over-tensioned, kinked or bent.
  Note
For the following operations a second mechanic is required to hold the charge air cooler.
–  Unhook the charge-air cooler upwards out of the lower bearings and swivel it backwards.
  N10-10090
–  Unscrew the side screw -1- on the bottom right for attaching the coolant lines on the charge-air cooler.
  S21-0137
–  Screw out the fixing screws -1- of the condenser.
–  Remove charge air cooler downwards.
Install
Installation is performed in the reverse order, pay attention to the following points:
–  For this step, observe the assembly instruction for hose connections with push-fit couplings → Chapter.
  S19-0234

Hose connections with push-fit couplings > < Charge air cooling - Summary of components