Octavia Mk2
| Intake manifold - Summary of components |
| 1 - | Vacuum hose |
| 2 - | Vacuum reservoir |
| 3 - | 5 Nm |
| q | only for engine identification characters BLR, BLX, BVX, BVY |
| 4 - | Top connection pipe |
| q | for exhaust gas recirculation |
| q | only for engine identification characters BLR, BLX, BVX, BVY |
| 5 - | Vacuum hose |
| q | with non-return valve |
| 6 - | Crankcase ventilation hose |
| 7 - | Sealing ring |
| q | replace if damaged |
| q | only for engine identification characters BLR, BLX, BVX, BVY |
| 8 - | Cable strap |
| 9 - | 8 Nm |
| 10 - | Throttle valve control unit -J338- |
| q | with throttle valve drive for electronic power control -G186-, angle sensor 1 for throttle valve drive for electronic power control -G187- and angle sensor 2 for throttle valve drive for electronic power control -G188- |
| q | when replacing, adapt the engine control unit → Vehicle diagnosis, testing and information system VAS 5051 |
| q | Clean throttle valve control unit → Chapter |
| 11 - | Connection for suction jet pump |
| 12 - | Sealing ring |
| q | replace if damaged |
| 13 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
| 14 - | 3 Nm |
| 15 - | O-ring |
| q | replace |
| 16 - | 10 Nm |
| 17 - | Rubber-metal bearing, 3 Nm |
| 18 - | Intake manifold support |
| 19 - | 25 Nm |
| 20 - | 40 Nm |
| 21 - | Sealing ring |
| q | replace if damaged |
| 22 - | Sealing ring |
| q | replace if damaged |
| 23 - | Switching roller |
| 24 - | 7 Nm |
| 25 - | Cover |
| 26 - | Valve for variable intake manifold changeover -N156- |
| 27 - | Vacuum setting element |
| q | check → Chapter |
| 28 - | Intake manifold |
| q | removing and installing → Chapter |
| 29 - | Connection for activated charcoal filter system solenoid valve 1 -N80- |
