skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Engine lubrication > < Valve dimensions

Octavia Mk2

Inspect valve guides
Inspect valve guides
Special tools and workshop equipment required
t  Universal dial gauge holder -MP 3-447 (VW 387)-
t  Dial gauge
   
Test sequence
  Note
If the valves are replaced when carrying out repair work, use new valves for the measurement.
–  Insert valve into valve guide. End of valve stem must be flush with guide.
Valve rock: maximum 1.3 mm
  Note
If the wear limit is exceeded, repeat measurement with new valves. If the wear limit is again exceeded, replace cylinder head. The valve guides cannot be replaced.
  S15-0078

Engine lubrication > < Valve dimensions