Octavia Mk2
Unit injectors - Summary of components |
Note
Observe rules for cleanliness → Chapter. |
1 - | 3 Nm + torque a further 270° (3/4 turn) |
q | replace |
Note
The torquing angle of 270° must absolutely be carried out in one working step! |
2 - | Valve-lever shaft |
q | removing and installing → Chapter |
3 - | 20 Nm + torque a further 90° (1/4 turn) |
q | replace |
4 - | Adjusting screw |
q | replace |
q | Grease the contact surface of the unit injector to the ball pin using grease -G 000 100- |
5 - | Counternut - 30 Nm |
6 - | The unit injector |
q | removing and installing → Chapter |
q | Release plug with extractor -T10312- |
q | When installing, oil the O-rings and the lines in the cylinder head |
7 - | O-ring |
q | replace → Chapter |
8 - | O-ring |
q | replace → Chapter |
9 - | Cylinder head |