skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Replacing gasket ring for crankshaft -on the belt pulley side- > < Install timing belt (set the timing)

Octavia Mk2

Removing and installing sealing flange and flywheel
Removing and installing sealing flange and flywheel
  Note
Repairs to the clutch → gearbox → Rep. Gr.30.
   
1 - Gasket ring
q   replace → Chapter
q   do not oil or grease
2 - Sealing flange -on the belt pulley side-
q   must be positioned on dowel sleeves
q   removing and installing → Chapter
3 - Cylinder block
4 - The two-mass flywheel
q   removing and installing → Chapter
q   Assembly is only possible in one position through offset holes.
5 - 60 Nm + torque a further 90° (1/4 turn)
q   replace
6 - Intermediate plate
q   must be positioned on dowel sleeves
q   do not damage/bend during assembly work
q   inserted on sealing flange → Fig.
7 - 15 Nm
q   replace
8 - Sealing flange -on the gearbox side-
q   can only be replaced complete with gasket ring and with rotor of engine speed sender -G28-
q   replace → Chapter
9 - Engine speed sender -G28-
q   removing and installing → Chapter
10 - 5 Nm

   
Installing intermediate plate
–  Insert intermediate plate on sealing flange and push onto the dowel sleeves -arrows-.
  S13-0541

Replacing gasket ring for crankshaft -on the belt pulley side- > < Install timing belt (set the timing)