Additional instructions when undertaking assembly work on the air-conditioning system |
WARNING Do not open the refrigerant circuit of the air conditioning system. |
|
Note To avoid causing damage to the condenser and to the refrigerant lines and hoses make sure the lines and hoses are not over-extended, kinked or bent. |
Steps which should be taken in order to remove and install the engine without opening the refrigerant circuit. |
–
| Unscrew the holding clamp(s) on the refrigerent lines |
–
| Remove AC compressor from the bracket for auxiliary units → Chapter. |
–
| Mount the air conditioning compressor and the condenser at the structure in such a way that the refrigerent lines and hoses are not under tension. |
|
|
|