- Running gear
- Body
- Drive unit
- Power transmission
- Gearbox 0A4
- Gearbox 0AF
- Gearbox 02Q
- Gearbox 02S
- Manual gearbox 0AJ
- Gearbox 09G
- Gearbox 02E-DSG
- Technical Data
- Clutch, control
- Gearbox mechanics,operation, construction,diff.
- Gearbox,mechanics,gears,shafts,internal operation
- Final drive, differential, differential lock
- Replace gasket rings at gearbox and angle gearbox
- Summary of components - Gasket rings (Octavia ll)
- Replacing the left flange shaft gasket ring
- Replacing gasket ring for flange shaft or right rigid shaft, vehicles with front-wheel drive (Octavia II, Superb II)
- Replacing the right flange shaft gasket ring (vehicles with four-wheel drive)
- Removing
- Install
- Replacing gasket ring between angle gearbox and gearbox on installed gearbox (Octavia II, Superb II)
- Replacing gasket ring between angle gearbox and gearbox on removed angle gearbox
- Replacing the gasket ring for the angle gearbox output flange
- Replacing the needle bearing (polygon bearing) and gasket ring on the right flange shaft (vehicles with four-wheel drive)
- Removing and installing propshaft
- Repairing propshaft
- Removing and installing the rear final drive
- Replacing gasket rings for flange shafts at rear final drive (rear final drive installed)
- Replace gasket ring for flange on the Haldex coupling on installed rear final drive
- Electrical/electronic components and fitting locations for the Haldex coupling
- Removing and installing Haldex coupling
- Disassembling and assembling Haldex coupling
- Check oil level in the Haldex coupling or change oil or top up with oil
- Check the oil level in the rear final drive or top up with oil
- Inspecting operation of Haldex coupling - Vehicles with automatic gearbox DSG - 02E
- Gearbox 0AM-DSG
- Vehicle electrics
- Heating, ventilation, air conditioning system
- Power unit