| Summary of components (Octavia II, Superb II) → Chapter. |
Note | t
| During the manufacture, the entire propshaft is balanced, in order to obtain the smoothest running possible. The balancing of the entire propshaft is not possible with workshop tools. Thus in case of damage, the entire propshaft must be replaced → Electronic Catalogue of Original Parts. |
| t
| Do not bend the propshaft, only store extended and transport. |
| t
| Before the removal, mark the position of all parts to each other. Carry out the installation again in the same position, otherwise the imbalance is too great, damages to the bearing and humming noises could occur. |
| t
| The flexible disks on the propshaft and the corresponding fixing screws are not available as a spare part. Thus in case of damage, the entire propshaft must be replaced → Electronic Catalogue of Original Parts. |
|
|
|
