skoda Workshop Repair Guides

Skoda Workshop Service and Repair Manuals

ABOUT US
Removing and installing gearbox oil cooler|Install > < Removing and installing gearbox oil cooler

Octavia Mk2

Removing
Removing
–  Shift selector lever into position „P“.
–  Remove engine cover → engine; Rep. gr.10.
–  Remove air filter → Engine; Rep. gr.24 or → Rep. gr.23.
  Note
If the battery earth strap is disconnected and connected, carry out certain additional operations → Electrical System; Rep. gr.27.
–  Remove battery and battery tray → Electrical System; Rep. gr.27.
  WARNING
Hot steam may escape after the compensation bottle is opened. Cover the cap with a cloth and open carefully.
  Note
t  When the engine is warm the cooling system is under pressure. Slowly open the cap of the compensation bottle, in order to first reduce pressure before pulling off the coolant hoses.
t  Do not place fluffing cloths on the gearbox oil cooler and the gearbox, in order to collect flowing out coolant.
–  Mark the coolant hoses to the gearbox oil cooler in order to prevent interchanging when installing.
   
–  Pinch off coolant hoses with hose clamps -MP7-602 (3094)- and remove hoses from gearbox oil cooler.
  S34-0921
–  Unscrew screws -A- and remove the gearbox oil cooler -B-.
  Caution
No coolant must drip onto the gearbox or into the oil bores!
  S34-0922

Removing and installing gearbox oil cooler|Install > < Removing and installing gearbox oil cooler